News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

VEMS Ignition Configuration Change

Started by RogueEngineer, August 06, 2020, 02:34:28 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

RogueEngineer

August 06, 2020, 02:34:28 PM
My current VEMS system is set up for a single coil and distributor configuration, but I'm interested in changing to a 6-2 setup for a twin-plug flat-6 engine. What needs to change inside the VEMS unit to facilitate this change?

Kamuto

#1
August 18, 2020, 10:52:42 AM
Quote from: RogueEngineer on August 06, 2020, 02:34:28 PM
My current VEMS system is set up for a single coil and distributor configuration, but I'm interested in changing to a 6-2 setup for a twin-plug flat-6 engine. What needs to change inside the VEMS unit to facilitate this change?
any idea what was the original spec you ordered it?
Vems installer in Lithuania
[email protected]
Print
Go Up Pages1
User actions