Use analog input in condition >> Protection

[Matus]

Hi,

Is it possible to configure analog input as condition trigger for protection like ? : condition pressure below value   action turn of ignition or / RPM limit set to 2000

I would like to simulate Stock protections like i seen in  M3 E92 where oil temperature above 140st cause  change of allowed RPM

[Kamuto]

Hi,

Is it possible to configure analog input as condition trigger for protection like ? : condition pressure below value   action turn of ignition or / RPM limit set to 2000

I would like to simulate Stock protections like i seen in  M3 E92 where oil temperature above 140st cause  change of allowed RPM

yes, no problem, use anytrim channels :)

[Matus]

Nice, I found it finally regarding name of the feature. Thanks.

Actually I found also help page for it but I don't see how to have available all five channels as I see only CH1 - CH3. Also available options that I see don't match with options listed in help.
So the question is .. is it version depending ( yes I suppose ) and how I can "activate" other channels ?

I am using VemsTune 1.5.33

ECU is running firmware1.2.31

[Kamuto]

Nice, I found it finally regarding name of the feature. Thanks.

Actually I found also help page for it but I don't see how to have available all five channels as I see only CH1 - CH3. Also available options that I see don't match with options listed in help.
So the question is .. is it version depending ( yes I suppose ) and how I can "activate" other channels ?

I am using VemsTune 1.5.33

ECU is running firmware1.2.31

upgrade it to 1.2.32 :) it has much more options for anytrim :)

[Matus]

And how to upgrade to 1.2.32 when I don't see it as available from web ?
I just have example config file version 1.2.32 where I see all 5 Anytrim channels

[Matus]

Hi,

Any news ? I start working on new cabling finally actually car cabling in first. It takes me up to 3 weeks  and than I would like to start with engine cabling. So this topic is starting to be important for me :D