Why no CAN ?

[gunni]

Will there be CAN at all in VEMS?

I work in top level motorsport on a daily basis, and essentially/literally todays race/club cars wouldn´t work without CAN of some sort.

With proper GUI implementation it could be an incredible asset to the ecu and allow VEMS to develop additional hardware to go with it.
number one would be SD card logger via pre-defined CAN stream, allowing high speed logging and instant offloading. It also allows the ECU to be used with any of the video recording loggers for race cars. VBOX , RACE KEEPER and so on, they all accept CAN streams and could receive the basic signals from VEMS.
It would also allow a 1MBIT CAN stream to the Laptop. This can provide high speed logging as well as alot more detailed data stream from ECU - LAPTOP without lack of stream speed.

The possibilities become literally endless.
Output to CAN logger, to dash, to car electronics, gearboxes, diff controllers, other VEMS designed hardware
Input from CAN analog/digital expansion box, from ABS modules ( wheel speeds , ABS activity, G sensors ), from OEM control modules, from Lambda boxes, from EGT sensor boxes and so on and so on.

Ideally ditching the whole AIM protocol to the VEMS round would be the best starting point and use CAN. Any channel from the ecu without limitations could be sent from the ECU to the Round for viewing.

free .dbc file editor/viewer
http://www.kvaser.com/software/7330130980334/V2/UG_98033_kvaser_database_editor_userguide.pdf
Could be used to make CAN streams for the ECU. .dbc file format is the industry standard.
So you would simply load the ecu with a .dbc file and jobs done.

More on CAN
http://www.kvaser.com/software/7330130980914/V1/can2spec.pdf

http://www.kvaser.com/support/downloads/

Thoughts?

[VEMS]

Hello Gunni,

We are already making developments in this direction (currently in prototype HW stage). More info will be available in due time.

Best regards, Dave

[Denmark]

Thumps up  :)

[gunni]

That is great news Dave.

any potential VEMS hardware that will be CAN based?

[Kamuto]

maybe new version of vems board?

[gunni]

I meant something like analog expansion hardware, logger and so on

[Kamuto]

anyway expansion hw would be great  :o

[VEMS]

The new module is expansion, used together with v3 and acts as a bridge (USB, CAN, several serial ports), adds considerable analog and digital io, adds even more trigger inputs, adds considerable amount of high side drivers and high current push pull driver (ETC control) has onboard logging (SD card) with RTC.

All will be elaborated in due time.

Best regards, Dave

[gunni]

Now that is some good news !!

[peter_jensen]

Thumps up   ;D ;D

[NOTORIOUS VR]

The new module is expansion, used together with v3 and acts as a bridge (USB, CAN, several serial ports), adds considerable analog and digital io, adds even more trigger inputs, adds considerable amount of high side drivers and high current push pull driver (ETC control) has onboard logging (SD card) with RTC.

All will be elaborated in due time.

Best regards, Dave

This makes me extremely happy!

[Kamuto]

The new module is expansion, used together with v3 and acts as a bridge (USB, CAN, several serial ports), adds considerable analog and digital io, adds even more trigger inputs, adds considerable amount of high side drivers and high current push pull driver (ETC control) has onboard logging (SD card) with RTC.

All will be elaborated in due time.

Best regards, Dave

This makes me extremely happy!

it's the best porn I have ever seen..

[wazzu70]

Awesome :)

I had been wondering if a V4 board or something would be released to include these options.

Keep up the good work!

[Kamuto]

Awesome :)

I had been wondering if a V4 board or something would be released to include these options.

Keep up the good work!

yes it's about the time, because when you need to start something like s54 or other engine it's real mess inside the case

[magoo]

Some news about this?

I have a Dash 2 that I would like to get up and working with my Vems.
Race Technology serial interface for vems is of no use  ( just gives random numbers)