News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Fuel film question.

Started by JohnP, January 01, 2014, 06:08:39 PM

Previous topic - Next topic

JohnP

Looking to remove some fueling when the throttle is lifted. Is the en lean down scale where the adjustment is made for temporary leaning?

Thank you. John

VEMS

Hello John,

The function you are looking for is either overrun fuelcut (tps based) or low map fuelcut (map based) both can be enabled at the same time. These can be found in base setup -> revlimit / overrun /safety menu -> overrun fuelcut section.

Best regards, Dave

gunni

I think he means enleanment, we can change the accel enrich into a positive and negative scaling so that it does both enrichment and enleanment which I would be interested in having.

VEMS

Hello Gunnar,

I have seen your proposal for decel enleanment in: http://www.vems.hu/wiki/index.php?page=MembersPage/GunnarReynisson/FirmwareRequest, this makes sense; We have some more accel enrichment changes coming up  (after the big firmware overhaul in 1.2.20 (now released for testing) ),  it might be possible to integrate this proposal as well.

Best regards, Dave