News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Any one know the trigger signal of Opel 2,5 V6 24v

Started by peter_jensen, September 30, 2012, 04:34:05 PM

Previous topic - Next topic

peter_jensen

Hi

Any one know the trigger signal of Opel 2,5 V6 24v year 93

Crank?
Cam?

Thank you
/Peter

mattias

A little late maybe, but it's 60-2 VR on the crank  - sensor mounts to the block, reads the pattern from a pattern next to one of the main bearings, just like some Saab engines. Cam sync was Hall-type single tooth afaik. I did one two years ago, only it was a 3.0 litre.