News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Wrong Starting - Cranking/Afterstart

Started by JRD McLAREN, July 16, 2012, 06:09:15 PM

Previous topic - Next topic

JRD McLAREN

Hello..
I have problem with starting my engine.. not matter if is cold or heat..

I not sure, it is only my suggestion maybe..
but if I have connected the tuning laptop, engine will start after few rews...
without anything connected - it can't start.

Have anybody some advice??
or same/similar problem .??

mattias

The ECU thinks you're shorting the RX/TX wire on pin 2 and 3 of the serial port, and drops to bootloader mode instead of running the engine.

Make sure your serial port wiring is "nice looking".

(your post edited for clarity)

JRD McLAREN

(thanks for edit...)

Thanks mattias...
I will try to start without serial cable..

JRD McLAREN

So..
nothing bootloader mode,
fuel pump is running after switch ing on...  :-\