News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Flyback Wiring

Started by utkuselamoglu, May 02, 2012, 08:38:48 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

utkuselamoglu

May 02, 2012, 08:38:48 AM
Hello,

I have vems unit with no engine harness. How do I now that there is flyback diodes inside my Case? Can I directly connect the flyback wire to pin 23?

I don't have the units configuration paper. I have only the unit.

Thank you very much.
utku selamoglu

GintsK

#1
May 02, 2012, 09:29:13 AM
You can connect - it is safe way.
If you face with heavy idle mixture control problems, then check diode presence inside ECU.
Print
Go Up Pages1
User actions