News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Bosch 3 wire idle control valve

Started by gunni, January 14, 2012, 10:28:46 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

gunni

January 14, 2012, 10:28:46 AM
I had a look at a stock motronic setup and the duration of both sides of the control is 10ms, so 100Hz would be the correct frequency for this solenoid.

stroft

#1
January 15, 2012, 11:25:04 AM
Good to know !

GintsK

#2
January 15, 2012, 07:47:38 PM
control pulse or control period?

gunni

#3
January 15, 2012, 08:05:30 PM
The joint control period for both sides was 10ms.

i.e 50% duty was 5ms on one side, 5ms on the other.
Print
Go Up Pages1
User actions