News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

8 injectors on a 4 cylinder

Started by se7ensport, April 17, 2007, 09:55:36 PM

Previous topic - Next topic

Sprocket

We are talking about this? Yes? :)

http://www.youtube.com/watch?v=viMG-Z2cGfo&feature=channel

Injector staging is possible yes, but have you seen the front of John Hastons car recently :-X not that you will have the same problem with a clubman front ;)

Its basicaly a dry nitrous system. It may get unstuck and melt something, even with as little as 25hp N2O. The higher the rpm the more likely to loose a piston or two if it runs lean and that is a 9krpm engine. Ask me how I know ;D Im sure Trevor would have something to say about it :D

gunni


miniminor63

oops, totally forgot the link obviously.

I am not planning on NOS luckily, as it is banned in the racing series.

If I end up with a nose extension/airfilter outside of the grille, even on a clubman I dont care really.

So, this is something I could think about implementing on the car without worrying if VEMS have the capabilities?


Sprocket

Yes, injector staging is functional. There are a few who are using it. Later firmwares have better implementation and whats more, there is some documantation for a change :)