Injector and Ignition Config in MT

[lugnuts]

Hello, new user here. I am using MT 2.25 and the injectors and ignition are going to be wired in firing order, as to allow a 6 cyl and 4 cyl unit to use the same (plug and play) harness pinout.

The part that really messes with my mind is the injectors, the modified firing order (ex. 1-3-4-2 becomes 4-2-1-3 because 4 is on the inlet cycle) Would a 6 cylinder 1-5-3-6-2-4 then become 6-2-4-1-5-3?? (offset the pattern by half the cylinders)
(The "other ecu systems" do this in the background, making me a dumber person as I found out recently!)

Rob can you please have a look at my MT settings? Thanks in advance!

Injectors
6 cyl
5..0

0  4
1  2
2  1
3  32
4  16
5   8

For crystal clarity, this would fire the VEMS pins 20-9-18-7-19-8 in order correct?

4 cyl
3..0

0  2
1  1
2  8
3  4

For crystal clarity, this would fire the VEMS pins 8-20-7-19 in order correct?

Ignition (4+4 Ign Output VEMS)
6 cyl 3X2 Waste Spark Coilpack using 5v IGN
02..00

0  4 
1  1
2  0

This fires VEMS pins 35-33-11 in order?

4 cyl Sequential COP using 5v IGN
03..00

0  5
1  4
2  1
3  0

This fires VEMS pins 35-33-11-12?

It will be a miracle if this is right, its 5:30 AM and I am half asleep!
Thanks,Kevin

[[email protected]]

Injectors
6 cyl
5..0

0  4
1  2
2  1
3  32
4  16
5   8

For crystal clarity, this would fire the VEMS pins 20-9-18-7-19-8 in order correct?

4 cyl
3..0

0  2
1  1
2  8
3  4

For crystal clarity, this would fire the VEMS pins 8-20-7-19 in order correct?

Ignition (4+4 Ign Output VEMS)
6 cyl 3X2 Waste Spark Coilpack using 5v IGN
02..00

0  4 
1  1
2  0

This fires VEMS pins 35-33-11 in order?

4 cyl Sequential COP using 5v IGN
03..00

0  5
1  4
2  1
3  0

This fires VEMS pins 35-33-11-12?

Injectors are correct.  Ignition is too, but the numbering is wrong

02..00

0  40
1  10
2  00

And

03..00

0  50
1  40
2  10
3  00

Cheers

Rob

[lugnuts]

<<<Ignition is too, but the numbering is wrong

02..00

0  40
1  10
2  00>>>


Thank you!
For the ignition numbers, do you mean in Megatune it should be like that? Here is my config screen using VEMS MT 2.25 and 1.1.23 firmware.

[[email protected]]

If you're using MegaTune then its pretty much self-explanatory.  If you get a no spark then you'll need to upload-config and edit the tables by hand.