News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

COP connectors ( VW / Audi)

Started by lost, May 16, 2010, 04:35:12 AM

Previous topic - Next topic

lost

Does anyone know where to buy connectors that fits VW 115 COP?

In Vems webshop they sell it onley with coil for 15$ for four i suppose.

Thanks!



Uploaded with ImageShack.us

GTOBB


from MSEXTRA page:

The coil pack connections:
Pin 1: Connects to Pin 1 on all other coils and then to +12v ignition feed (or fuel pump relay).
Pin 2: Signal ground (connect to ground at MegaSquirt's ground)
Pin 3: Spark Signal from ECU (ign output without power transistor  or logic level )
Pin 4: Power ground (Engine Earth)

i tested it in R5 audi s2 and working good



lost

Does anyone knows where to buy these connectors?
:-\


MWfire



lost

got them from vw dealer. harness with four connectors is around 30â,¬