Advance and triggering setup

[rob@vems.co.uk]

What are your injector outputs set to?  If you set them to fire an empty channel and then the injector channel you will get half the pulses.
I think you would benefit from trying the new firmware and VEMSTune, if you do uncover any issues then they will be dealt with quicker.

[MWfire]

in injector settings you have divider. Set to two. Or set reg_fuel twice lower.

[Nack]

Hi Guys,

Thanks for the replies! The engine is running currently without the cam sensor and injecting and sparking every 360 degrees.  ;D

But how did we fix it?
In Engine Setup > Number of Cylinders we changed the setting from '1' to '2'. I don't know how the firmware in vems uses this variable but we got the correct ignition timings.

[rob@vems.co.uk]

This thread is useless without pictures or video ;D

[Nack]

Hi Rob,

A little late, but... well a little small movie of the engine running: [link removed]

[Nack]

Had to remove the clip in the above reply.

Video:
http://www.youtube.com/watch?v=tssjBmWLJak&feature=related

[rob@vems.co.uk]

Nice!