News:

When asking for technical help at the very least let us know the version of firmware you are running.
Cliff's Calibration (Mapping) Guide is a MUST READ: http://www.vemssupport.com/forum/index.php/topic,97.0.html

Main Menu

Lost RPM Signal (SOLVED)

Started by lugnuts, January 27, 2010, 10:47:16 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

lugnuts

January 27, 2010, 10:47:16 AM Last Edit: January 29, 2010, 06:02:47 AM by lugnuts
Problem solved.

Was caused by a bad crank sensor wire (sensor itself).

The shield wire has an intermittent short circuit against the + signal wire,
Diagnosis consisted of watching the +/- resistance while bending/flexing the crank sensor wire.
Very strange!

tonci

#1
April 21, 2010, 01:59:50 PM
How did the engine react on this fault? Did it worked erratic or it didn't want to start at all?
Print
Go Up Pages1
User actions