Text only | Text with Images

VEMS Community Forum

VEMS => Configuration => Topic started by: matyas on September 15, 2009, 01:10:17 PM

Title: BMW M30 config
Post by: matyas on September 15, 2009, 01:10:17 PM
Hello,
Can you help me please with configuration of MegaTune?  Everything is conect alright but engine will not start. Now it is detonations to axhaust. Isn´t any mistake in config file?
this is my wiring:
http://files.uloziste.com/67cb479e973c4f01/m30kompressor.msq (http://files.uloziste.com/67cb479e973c4f01/m30kompressor.msq)
primary trigger: VR sensor BMW E34 535i (black to pin 27, yelow to pin 26)

                          wheel 60-2 bmw e34 535i
secondary trigger: NONE

coil pack 3x2: pin1 to pin35, pin2 to 34, pin3 to 11

injectors 1-6 to A-F

Thank you
Title: Re: BMW M30 config
Post by: [email protected] on September 15, 2009, 03:34:01 PM
Is the ignition timing correct?

Are you getting the right sort of cranking fuelling?
Title: Re: BMW M30 config
Post by: matyas on September 15, 2009, 04:52:27 PM
1-5-3-6-2-4 engine, sparks 1&6, 5&2 and 3&4 fire at same time. so ignition outputs is correct a think...
0 35
1 34
2 11
3 35
4 34
5 11

Title: Re: BMW M30 config
Post by: [email protected] on September 15, 2009, 05:35:42 PM
I mean have you taken a timing light and ensured that the timing is correct?
Title: Re: BMW M30 config
Post by: matyas on September 15, 2009, 06:03:59 PM
not that. but trigger wheel is serial for this engine... primary trigger settings is same as other BMW M30
Title: Re: BMW M30 config
Post by: matyas on September 19, 2009, 05:23:27 PM
trigger is above 15th tooth in TDC (84deg after trigger  see http://wp1016621.wp027.webpack.hosteurope.de/fotost/f00884/06.jpg (http://wp1016621.wp027.webpack.hosteurope.de/fotost/f00884/06.jpg) )

firmare 1.1.27beta6

http://files.uloziste.com/67cb479e973c4f01/m30kompresor.msq (http://files.uloziste.com/67cb479e973c4f01/m30kompresor.msq)
http://files.uloziste.com/67cb479e973c4f01/datalog200909191108.xls (http://files.uloziste.com/67cb479e973c4f01/datalog200909191108.xls)

I don´t now how to config megatune (prim.trigger settings and reference tooth table)...

Matyas, Czech rep.
Title: Re: BMW M30 config
Post by: Pet on September 21, 2009, 01:53:29 AM
Hi all, sorry for czech language, but it's almost the same, like here in english (my last post) http://195.159.109.134/vemsuk/forum/index.php/topic,886.0.html
        Zdar, nevim jestli ti to pomuze: obecne kdyz je motor v HU (1valec), tak spocitej kolik je to zubu od sensoru. U mne je to napr. 20zub, tzn. 20*6=120° , takze od doby kdy sensor detekuje dva chybejici zuby do HU je to 120°. Kdyz nastavis Trigger tooth dejme tomu na 8 zub (pocitano od 2chybejicich), tzn. 8*6=48°, takze pak ti zbejva od tohodle trigru do HU 120-48=72° coz je TDC after triger hodnota. A pro predstih mas tim padem az 72°. Jinak viz ten odkaz vyse, tam je to i s fotkou jak to myslim. Reference tooth table ti ted neporadim, ja pouzivm FW 1.0.78rc2 a tam to neni...Zdravim.
Title: Re: BMW M30 config
Post by: matyas on September 21, 2009, 02:19:51 AM
Ahoj. Moc dekuju, konecne to chapu ;)
Text only | Text with Images