Print Page - Please Help M50B25nv no crank no start

Title: Please Help M50B25nv no crank no start
Post by: Mendozza on June 07, 2020, 08:56:18 AM

Hi,
Just installed my new VEMS V3.8 with 3.6 board plug and play ecu onto my M50b25nv engine. Not sure why, but I have a crank no start.
If i plug my stock ECU in, the car fires right up. Could there be something wrong in my config? Or maybe inside the ECU itself?

Any help is appreciated. Need to fix this ASAP

i have some triging logs
(http://imgshare.io/image/NrBIFK)
(https://imgshare.io/image/NrBIFK)
http://imgshare.io/image/NrBIFK (http://imgshare.io/image/NrBIFK)

Title: Re: Please Help M50B25nv no crank no start
Post by: gox on June 23, 2020, 11:08:17 PM

Try reversing polarity on cam signal and take a log again

VEMS Community Forum

Members => Projects & Installs => Topic started by: Mendozza on June 07, 2020, 08:56:18 AM