Print Page - FW 1.1.18 Reference tooth table RB25

Title: FW 1.1.18 Reference tooth table RB25
Post by: krzak on August 01, 2009, 02:21:45 PM

Hello
Now I connect VEMS to RB25 and I am little confused what I must write in table Reference tooth table in 6cyl. I`ve CAS disk 24+1.
Please help me fill this table...
Thanks a lot for any advice.... :)

Title: Re: FW 1.1.18 Reference tooth table RB25
Post by: [email protected] on August 01, 2009, 11:36:21 PM

All this should be setup in the configs I sent you.

Title: Re: FW 1.1.18 Reference tooth table RB25
Post by: dundersmurfen on August 02, 2009, 01:11:29 AM

Some proven numbers would be nice... I have tried some different settings but nothing seems to make my rb26 work. Today i fired it up with 1.1.44. Now i get trigger errors, this makes sense since my problem must be related to trigger in some way. A screenshot of working primary secondary and reference tooth tables would be a good thing.

VEMS Community Forum

VEMS => Configuration => Topic started by: krzak on August 01, 2009, 02:21:45 PM