Print Page - 1.0.73 doesn't open

Title: 1.0.73 doesn't open
Post by: Alex on June 20, 2009, 07:01:53 PM

When I try to start Megatune with firmware package 1.0.73 it doesn't open.
What is wrong?
My laptop uses Windows Vista. My friends laptop with Windows XP has the same problem.

Thanks in advance

Alex

Title: Re: 1.0.73 doesn't open
Post by: Bat on June 20, 2009, 07:40:09 PM

Hi,
For some reason, I don't know what, the 1.0.73 FW will only work if in the route directory.
eg C:\Vems and not from a folder in my documents.
Cheers,
Gavin :)

Title: Re: 1.0.73 doesn't open
Post by: Alex on June 20, 2009, 08:45:46 PM

XP = :)
Vista = ???

As soon as i switch from COM8 (default in megatune.cfg when zip file is extracted) to COM1 (the com-port in my laptop) in Communications > Communication Settings Megatune won't start anymore.

Title: Re: 1.0.73 doesn't open
Post by: Bat on June 20, 2009, 08:47:40 PM

Hi,
I've not got Vista, so I can't help you there :(
Cheers,
Gavin :)

Title: Re: 1.0.73 doesn't open
Post by: Sprocket on June 21, 2009, 03:30:58 AM

Quote from: Bat on June 20, 2009, 07:40:09 PM
Hi,
For some reason, I don't know what, the 1.0.73 FW will only work if in the route directory.
eg C:\Vems and not from a folder in my documents.
Cheers,
Gavin :)

I run 1.0.73 firmware from 'My Documents' folder, no problems.

Is this an upgrade? as earlier Megatune.ini files wont work with 1.0.73, you need to use Megatune that is bundled with the firmware.

Other possabilities, is the com port set up in Megatune? Is the terminal program closed down?

Can you communicate to the VEMS with the terminal program?

This is the only good 1.0.73 bundled firmware I found to work http://media.vems.se/code/VemsMT1.0.73Final.zip

VEMS Community Forum

VEMS => Software => Topic started by: Alex on June 20, 2009, 07:01:53 PM