Print Page - change hall to vr for cam sensor?

Title: change hall to vr for cam sensor?
Post by: lost on March 18, 2019, 11:22:37 AM

i used this board as secondary CAM hall sensor, now i need to switch it to secondary VR.
what to add/remove to get it working.
Primary stays VR

pictures are in link of my v3.5 board/same as 3.3

https://imgur.com/a/SwchHA2 (https://imgur.com/a/SwchHA2)

Title: Re: change hall to vr for cam sensor?
Post by: jrussell on March 18, 2019, 06:51:24 PM

Add the second lm1815 and configure as detailed in the wiki under InputTriggerHardware

Title: Re: change hall to vr for cam sensor?
Post by: lost on March 18, 2019, 08:15:20 PM

Thanks, found it!

VEMS Community Forum

Technical => Triggering => Topic started by: lost on March 18, 2019, 11:22:37 AM