Text only | Text with Images

VEMS Community Forum

VEMS => Configuration => Topic started by: GTOBB on April 23, 2009, 02:16:43 AM

Title: 1.1.27 problem with launch indicator
Post by: GTOBB on April 23, 2009, 02:16:43 AM
Hi
I have got problem with launch control , switch is connect to input 5 , FPGauge show 0 or 5v corectly but on main screen  LAUNCH indicator not change status, all time is ON, I will test launch tomorrow -  ist working or not.

firm.. is 1.2.27 12x12  auditrigger.
Title: Re: 1.1.27 problem with launch indicator
Post by: gunni on April 23, 2009, 05:55:44 PM
What are your settings in the launch control window?
Title: Re: 1.1.27 problem with launch indicator
Post by: z0tya on April 24, 2009, 04:29:12 PM
Quote from: gunni on April 23, 2009, 05:55:44 PM
What are your settings in the launch control window?
Maybe need pullup to 5V
Title: Re: 1.1.27 problem with launch indicator
Post by: GTOBB on April 24, 2009, 05:20:29 PM
input channel 5 is pull up to 5V by 4,7kilo , indicator is not change status when i connect input to GND ( all time is on) , but  FPGauge  change status and show 5 or 0 volt.
Title: Re: 1.1.27 problem with launch indicator
Post by: gunni on April 24, 2009, 05:33:34 PM
you probably have the wrong input channel selected?
Text only | Text with Images