hello,
Help, I can not compile error:
Start -> Run -> CMD -> Pach dir -> SH -> make all
and error:
echo "runme from sh shell, Win32 cmd is broken, dies with CreateProcess error"
runme from sh shell, Win32 cmd is broken, dies with CreateProcess error
make: *** No rule to make target `vems.elf ', needed by` all'. Stop.
vems.elf ???
do not know what more closed, perhaps similar to what?
Dainius
Well over my head :-\
Thus resulted in my one does not work :-\ ???
has not even older and newer versions, and not make no changes :'(
This is way beyond the purpose of this forum, firmware is not available for public compilation any more, if you have signed the developers NDA then you should have contact with the people who can help.
As is done my_make changed the file on "VE-LEARN" and should be recompile.
http://www.vems.hu/wiki/index.php?page=GenBoard%2FFirmWare%2FBuildFirmwareFAQ
THE version 1.1.46
It says that it is possible and I try.
I realized that sellers should ask this question. ::)
You shouldn't be compiling firmware, who did you buy from?
I buy is "ACMV LLC" vems-Shop.
Then your first port of call is the Wiki.
Alternatively if you want to detail your project in the Projects section and ask specific questions in there the community here may be able to help you.
But there's no reason to be building your own code unless you have developer rights.
Thank you for the explanation.
Developer status is not required, not to have the time, I could verify and report the errors.
Wiki read, with all cope, at least not yet.
Would not extract "auto-tune maybe this is the least the head of the fraudsters.
Projects are minor, 8 sports car fans and a few drag cars, profisionales athlete does not want to "VEMS" ECU but admire, perhaps to try.
Auto-Tune should be using E85 and the E98 go to in order to specialize in running the city.
I am with the start of "KMS" ECU excellent job, so I want to VEMS.
To advise you on which firmware you need to use, we need to know which engine you are trying to install VEMS on.
My car S4 `93 AAN hibrid with a turbo from the Volvo 2.5 R5" dual fuel "petrol-etanol LPG."
And mounted: AAN S4, S2 ABY, RS2 ADU, Audi S2 3B Cupes TYP86 killer: D http://uk.youtube.com/watch?v=c6yLEpvZl7s
Preparations: Subaru, BMW, VW-mk4, Audi-A3 ...
I noticed on all the tissues in the starting of the ignition angle would be very premature, and may damage the starter "Crank the ignition angle 0".
There are a load of AAN setups on the wiki, did you get the one with the Motronic connector?
Buy GenBoard and 2.5TDI ECU box.
My soldering to end orginaloi ECU location, the example of motronic55.