Print Page - When Cranking , crank state remains off, RPM 0. Triggers seem to work.

Title: When Cranking , crank state remains off, RPM 0. Triggers seem to work.
Post by: rico_pl on August 22, 2018, 12:20:39 PM

Hi, I have an Escort Cosworth with a custom wiring loom. (no documentation....)
I created a trigger file and I see signals. But the cranking state remains off ?

Trigger is set to "Lancia_cosworth".
What could cause this ? Weak signal ? Alarm system ?

VT 1.5.55
Firmware 1.2.11

Thanks a lot for any hints. How to upload files ?
Rico

Title: Re: When Cranking , crank state remains off, RPM 0. Triggers seem to work.
Post by: jrussell on August 23, 2018, 05:49:50 PM

Probably wrong trigger settings if you're getting proper signals from trigger file.

To share config/logs/triggerlogs the easiest way is to use the help menu on VemsTune and submit a sharing center report. Then paste the URL here.

VEMS Community Forum

VEMS => Configuration => Topic started by: rico_pl on August 22, 2018, 12:20:39 PM