Print Page - WBo2 on an Impreza

Title: WBo2 on an Impreza
Post by: 500 on October 05, 2008, 12:34:19 PM

I've installed the WB02 into a 1998 Subaru impreza and taken the narrowband sensor out of the exhaust. I'll be connecting pin 1 to the OE ECU's narrowband input, can anyone clarify what settings need to be changed in MT if any?

Thanks, Adam.

Title: Re: WBo2 on an Impreza
Post by: [email protected] on October 05, 2008, 02:27:55 PM

You'll need to set the analog out to narrowband as defined here:
http://www.vems.co.uk/VEMSWB/UserGuide/README.html

VEMS Community Forum

Technical => Wideband & EGT Gauge => Topic started by: 500 on October 05, 2008, 12:34:19 PM