As requested, I am posting about my project. I built the truck starting in 2002 and first ran it on Genboard 2.2 in 2005....best I remember. I swapped to V3 when it came out in late 2006. I had engine problems for months and ended up parking the truck for two years to pursue other projects. I have the truck back together and Genboard is out for a small repair and check over by VEMS tech team USA(thanks Jason ;))
The truck is a 1983 S-10 chevy purpose built for drag racing.....Goal was single digit 1/4 mile times with pump gas.
Engine is a 410cid V8 Chevrolet:
-8.5:1 CR, all forged rotating assembly
-Dart Pro 1 230cc Heads,
-Edelbrock proflo intake and air valve
-50lb injectors - dummy sequential fire
-Mallory Hall effect distributor (dummy ignition) firing MSD 6A
-WB02 - open loop
-TV71 Garrett Turbo - 76mm compressor
-50mm wastegate, 35mm BOV
Chassis:
-TH350 transmission
-Art Carr Custom Billet converter - 3800RPM stall speed
-4 Link/coil over rear suspension
-9" Ford rearend with Mosier internals
-10 pt cage
-18.5 X 33 E/T streets out back
It's a rocket to drive....lots of fun when it is running. It is for sale once the genboard is back in it and it si running again.
Please put some pictures especially underhood one :)
I like this project very much.
Here you go...
(http://www.hotrodders.com/gallery/data/500/medium/4463DSC00572.JPG)
(http://www.hotrodders.com/gallery/data/500/medium/4463DSC00793.JPG)
(http://www.hotrodders.com/gallery/data/500/medium/4463DSC00576.JPG)
(http://www.hotrodders.com/gallery/data/500/medium/4463DSC00768.JPG)