Print Page - Individual injector trim

Title: Individual injector trim
Post by: 500 on June 25, 2008, 03:01:56 PM

is the above possible, for say if I have a flow rate differential of 3% over 4 injectors, is it possible to adjust the opening times for injectors if using sequential firing

Just so I know weather to get mine converted or buy a new set

thanks

Adam

Title: Re: Individual injector trim
Post by: [email protected] on June 25, 2008, 10:09:43 PM

We dont have individual cylinder trim - theres no better way to really get the fuelling badly wrong.

Title: Re: Individual injector trim
Post by: 500 on June 26, 2008, 08:23:07 AM

Thats a shame >:( looks like I will have to get some new injectors

Title: Re: Individual injector trim
Post by: [email protected] on June 27, 2008, 10:08:54 AM

Can you be sure that they will be better matched for flow though?

Title: Re: Individual injector trim
Post by: 500 on June 30, 2008, 11:24:55 AM

Yes, he'll flow match the new ones that he has (circa 50) and then mod them to 1000cc

it'll cost me an extra 300 for the new injectors :-\

VEMS Community Forum

Technical => Fuel Injection => Topic started by: 500 on June 25, 2008, 03:01:56 PM