Hi everyone,
I'm on the hunt for a 2" internal diameter V Band clamp with a 2.5" maximum radius at the outer edge of the "V" as it were. I have seen many at 2.5" internal and 3" external but none in the size I'm looking for. Has anyone any ideas where I could find one please?
I also now have a dual port actuator on my turbo and wondered what the best configuration with my VEMS boost solenoid will now be please?
Many Thanks,
Alan :)
Ask Pieter at DP engineering, they can get all sorts of turbo wonders:
[email protected]Also give Damo a shout - his Time Attack car thread is in the project section, he's got a twin port actuator that he's running with the solenoid.
for my 2 port wastegate i have used the guide here http://www.vems.hu/wiki/index.php?page=MembersPage/PhatBob/UserGuide
under Connecting A Boost Control Solenoid
see Connection option two
the presure bleed line seen there,
i have this going to the secound port but as i said im my pm i have not tried it yet as im just running off the waste gate spring at min so dont know if it will work or not