Print Page - tps signal is wrong

Title: tps signal is wrong
Post by: Denmark on April 09, 2008, 05:52:32 PM

Hi All.

On my old Subaru Legacy Turbo, the TPS signal is going from high voltage, when throttle is closed, to low voltage when going wot.

And this is also wrong in megatune,

So the q is,

Do i have to change the wiring, or can i change something in megatune to invert it?

Thanks,
Skassa

Title: Re: tps signal is wrong
Post by: [email protected] on April 09, 2008, 06:57:45 PM

Just set your low and high tdc values accordingly - the software can differentiate between the two :)

Title: Re: tps signal is wrong
Post by: Denmark on April 09, 2008, 07:59:16 PM

okay,

thanks, i will give it ago

/Skassa

Title: Re: tps signal is wrong
Post by: dnb on April 11, 2008, 12:23:05 AM

I use a Subaru TPS on my TVR now. It's a variable resistor, so can be wired backwards if you really want to.

Title: Re: tps signal is wrong
Post by: Denmark on April 11, 2008, 07:56:59 AM

Thanks,

I will first see if i can get it working with the wires the right way,(more pnp)
otherwise, i will switch them.

Thanks,
SKassa

VEMS Community Forum

VEMS => Configuration => Topic started by: Denmark on April 09, 2008, 05:52:32 PM