Print Page - help needed with laptop conection

Title: help needed with laptop conection
Post by: banbusa on March 02, 2008, 11:10:51 AM

having problems conecting my wideband and egt gauge to laptop
carn't find it. want to check out put to dta s60 ecu for closed loop.
anyone live near preston lancashire
many thanks mark ??? ???

Title: Re: help needed with laptop conection
Post by: [email protected] on March 02, 2008, 03:34:10 PM

Are you using a USB adaptor?

Title: Re: help needed with laptop conection
Post by: banbusa on March 02, 2008, 08:38:08 PM

hi rob, yes i am using an adaptor set up on com one.
am i right using the megatune software? can't find a section on gauge set up anologue out puts
many thanks mark

Title: Re: help needed with laptop conection
Post by: [email protected] on March 02, 2008, 10:15:01 PM

Are you using the MegaTune that came with this: http://www.vems.hu/download/round/round_2007-04-25.zip
At the bottom of the User Guide: http://www.vems.co.uk/VEMSWB/UserGuide/README.html is the method of setting up the com port, and the analog setup is under Settings->Analog Output

Title: Re: help needed with laptop conection
Post by: banbusa on March 03, 2008, 12:19:36 PM

thanks rob i was using wrong megatune software
mark

VEMS Community Forum

Technical => Wideband & EGT Gauge => Topic started by: banbusa on March 02, 2008, 11:10:51 AM