Hi,
is it possible to set any other display options than default one after power on?
Thx
Which other settings would you like to set?
I apologize for delay on answer, been out for a while.
Not any specifically, just wondering is it possible trough button on gauge or other simply way like MegaTune.
The User Guide http://www.vems.co.uk/VEMSWB/UserGuide/README.html has the display modes listed:
1. Lambda & Internal temp C, 2. AFR & Internal temp C, 3. Lambda & EGT C, 4. AFR & EGT C, 5. Lambda & Internal temp F, 6. AFR & Internal temp F, 7. Lambda & EGT F, 8. AFR & EGT F, 9. Lambda & MAT C, 10. AFR & MAT C, 11. Lambda & RPM, 12. AFR & RPM, 13. Lambda & MAT F, 14. AFR & MAT F.
Oh, I know what other options it has, but I wonder if it possible to have any of those I like straightway after power on? For example,option 5. Lambda & Internal temp shows after power on without pushing button 4 times.
Sorry if I'm bothering you with this, it's really nothing that much important, I'm just curious.
You can use the MegaTune app to set the values, then when you burn to unit it will default to what you set at start-up.
Is there a way to delete or disable some modes (example: modes in F).
And other odd thing is that when I configure the gauge with megatune, when I choose EGT C it shows me temperature in F and thats not only one, other names are also, I choose one but gauge shows something else.
One thing more, 3 mode should be Lambda & EGT C but megatune shows to me that third mode is AFR & EGT C ???
I'm afraid that those modes are stuck in place.
I dont know about the MT settings, I only use the terminal interface.
Rob