Print Page - M50 Vanos PNP Ecu Extra Function Connector pinout

Title: M50 Vanos PNP Ecu Extra Function Connector pinout
Post by: e30sforlife on April 17, 2018, 10:45:29 PM

Hi, I have an M50 vanos PNP ECU with the 10pin extra function connector and i was wondering if anyone has a pinout of the plug.

Im trying to get the ECU to control my single speed cooling fan with a 12v relay and Im not sure which pin to use on this plug and how to setup the Analog outputs.

Sorry for the noob question, but any help is appreciated!

Thanks

Title: Re: M50 Vanos PNP Ecu Extra Function Connector pinout
Post by: gunni on April 18, 2018, 08:15:30 PM

Here is some information - https://sway.com/GZ00i4xoVNfUBgcg?ref=Link

VEMS Community Forum

Technical => Wiring & Sensors => Topic started by: e30sforlife on April 17, 2018, 10:45:29 PM