Why is my warning liht on Vemsdisplay flickers? It's randomly on for a 0.1s. ??? No tr error, or couldn't find any other problems. Logs in link.
https://drive.google.com/drive/folders/1zktFBQsPefiFMLO2_V9o6tWVdcsYBWPu?usp=sharing (https://drive.google.com/drive/folders/1zktFBQsPefiFMLO2_V9o6tWVdcsYBWPu?usp=sharing)
???
Quote from: Sam8888 on January 12, 2018, 12:24:46 PM
???
I checked it fast, but could not see anything bad too
Quote from: Sam8888 on January 09, 2018, 09:31:22 AM
Why is my warning liht on Vemsdisplay flickers? It's randomly on for a 0.1s. ??? No tr error, or couldn't find any other problems. Logs in link.
With the las VT build from January 2018 I see nothing from in your log
Quote from: fphil on January 14, 2018, 09:54:37 PM
Quote from: Sam8888 on January 09, 2018, 09:31:22 AM
Why is my warning liht on Vemsdisplay flickers? It's randomly on for a 0.1s. ??? No tr error, or couldn't find any other problems. Logs in link.
With the las VT build from January 2018 I see nothing from in your log
zoom in properly, there is like 0.1s long warning light on
Problem in the serial connection could cause that?
This warning light flicker is driving me nuts. Maybe someone from vems could look at it?
Quote from: Sam8888 on January 16, 2018, 04:09:17 PM
Problem in the serial connection could cause that?
This warning light flicker is driving me nuts. Maybe someone from vems could look at it?
no, serial cant make anything with it
It'd be a nice feature, if warning light occurs, when i hover the mouse on the flag, it would show the cause of the WL.
Yaaaaay figured out wtf was going on with the flickering WL. ;D
Soo the problem was the warning light settings "values". My adc channel sometimes flicker to 4.98V. Set that value lower and all is good.
(http://img2.indafoto.hu/7/9/11679_780261c4b9a55cd803080619d0cc3e11/25655496_48e7a3e375de25dc3abf838b424e5c2d_xxl.jpg)