HI New to the Site, so bare with me...
I have a VEMS (lugtronic) that I purchased used. It's up and running just fine, i am interested in some of the features of the new firmware most notably adding the second wheelspeed sensor and i am not really sure what configuration/ options my ECU already has...
I read somewhere that i could send my ECU Serial number to somebody/place and i could be supplied a "buildsheet" so to speak....
Is this the case?
If so , what's the process for this?
Any help would be appreciated.
I sent vems an email with the serial number and they replied with a quick configuration list.
It's not a show stopper though... just try and see if it works.
You need to know your board rev # to know where you would connect.