In my case, I need a way to turn "traction control" ON/OFF with a digital input so it doesn't come into play when doing a burnout or when on the dyno.
This means under: Launch Control RPM Curve/ Launch Speedbase Control besides the Enable/Disable option we need to be able to pick one of the inputs as means of turning the feature On/Off.
Also, when using Anytrim3 for Spark trim based on Speed1-Speed2 should be able able to turn Anytrim3 On/OFF with an input.
I know you can do this by "switching maps" but that's a lot of work. Every time I make a change i need to update both maps, then go back and disable launch control on one of them.
So, any way somebody can get this done? :D
Quote from: RazOn on January 11, 2017, 01:54:30 AM
In my case, I need a way to turn "traction control" ON/OFF with a digital input so it doesn't come into play when doing a burnout or when on the dyno.
This means under: Launch Control RPM Curve/ Launch Speedbase Control besides the Enable/Disable option we need to be able to pick one of the inputs as means of turning the feature On/Off.
Also, when using Anytrim3 for Spark trim based on Speed1-Speed2 should be able able to turn Anytrim3 On/OFF with an input.
I know you can do this by "switching maps" but that's a lot of work. Every time I make a change i need to update both maps, then go back and disable launch control on one of them.
So, any way somebody can get this done? :D
switch maps... that's not lot of work..
Ha ha! :D For me it is... I barely have time to get the car ready for next race between runs... my mind is in a thousand places. I often make changes between runs, if I miss one of the settings it can cost me the race. The less stuff I need to do, the better.
Any cool car has a button to disable traction control for a reason ;)
I'm also thinking to save the "switch map" feature to help with my idle control.
Does Launch control not already have Input switch for enable? First item in config page....
To request feature add detailed request on the Wiki. http://www.vems.hu/wiki/index.php?page=GenBoard%2FUnderDevelopment%2FFirmWare
anyway just wait for 1.2.38 to come ;) next week I believe ;)
Thanks man! 1.2.38 is out now. I'll try it this weekend. Looks promising!!!
1.2.38 looks like an amazing update/FW!
Makes me very happy to see this kind of progress, if they would round it off with allowing us to send/receive CAN messages so that we can interface w/ stock clusters/dashboards, etc that would be amazing :)
Quote from: NOTORIOUS VR on February 02, 2017, 07:58:56 PM
1.2.38 looks like an amazing update/FW!
Makes me very happy to see this kind of progress, if they would round it off with allowing us to send/receive CAN messages so that we can interface w/ stock clusters/dashboards, etc that would be amazing :)
something would happen in near future with that, maybe not the way you expect it :) you can start scanning can bus for ID's and conversions you need :)
Quote from: Kamuto on February 02, 2017, 08:13:38 PMyou can start scanning can bus for ID's and conversions you need :)
My CAN BUS interface is on the way :)
Quote from: NOTORIOUS VR on February 06, 2017, 02:34:13 PM
Quote from: Kamuto on February 02, 2017, 08:13:38 PMyou can start scanning can bus for ID's and conversions you need :)
My CAN BUS interface is on the way :)
really nice to hear that :)
Quote from: Kamuto on February 06, 2017, 04:32:27 PM
really nice to hear that :)
Just arrived from LT :)
(http://i.imgur.com/ficUfD9.jpg)
Quote from: NOTORIOUS VR on February 10, 2017, 06:29:16 PM
Quote from: Kamuto on February 06, 2017, 04:32:27 PM
really nice to hear that :)
Just arrived from LT :)
(http://i.imgur.com/ficUfD9.jpg)
thinking to order the same for myself :)) native linux support is nice
Quote from: Kamuto on February 22, 2017, 10:58:44 AM
Quote from: NOTORIOUS VR on February 10, 2017, 06:29:16 PM
Quote from: Kamuto on February 06, 2017, 04:32:27 PM
really nice to hear that :)
Just arrived from LT :)
managed to use it?
Not yet been quite busy with work... also have to dig up an old Thinkpad and install Linux on it before anything, or install via VM on my current laptop (not sure how nice it and the drivers will play with a VM).
Quote from: NOTORIOUS VR on February 22, 2017, 01:16:23 PM
Quote from: Kamuto on February 22, 2017, 10:58:44 AM
Quote from: NOTORIOUS VR on February 10, 2017, 06:29:16 PM
Quote from: Kamuto on February 06, 2017, 04:32:27 PM
really nice to hear that :)
Just arrived from LT :)
managed to use it?
Not yet been quite busy with work... also have to dig up an old Thinkpad and install Linux on it before anything, or install via VM on my current laptop (not sure how nice it and the drivers will play with a VM).
you can allways put some raspberry or orange pi there, install can utils in it and connect to it over network :))
Quote from: Kamuto on February 22, 2017, 02:53:16 PM
you can allways put some raspberry or orange pi there, install can utils in it and connect to it over network :))
Not a bad idea either :)