Engine runs fine with primary trigger only, but when I enable the secondary trigger engine starts but it runs very rough....like on half cylinders.
This is a VR6 engine, stock 60-2 crank sensor and stock 1pulse per cycle cam sensor.
I'm trying to get full sequential injection with wasted spark ignition.
To me it looks like I only get ignition events in the first engine cycle.
Somehow I need to get 6 ignition events using only 3 ignition outputs.
Any suggestions on how to do that?
I enabled sectrig (nothing else changed), took a screenshot of the settings and logged the triggers.
This is the configuration that doesn't run good.
Link to trigger log file:
https://www.dropbox.com/s/szfvykwqxgb0nml/TrigLog2.triggerlog?dl=0 (https://www.dropbox.com/s/szfvykwqxgb0nml/TrigLog2.triggerlog?dl=0)
(http://i1222.photobucket.com/albums/dd482/Razond/TriggerConfig.png)
(http://i1222.photobucket.com/albums/dd482/Razond/TrigLog.png)
Just thought of something.... Would this work?
(http://i1222.photobucket.com/albums/dd482/Razond/SequentialConfig.png)
yes it will work
It DOES work! Thank you very much!
Although... I had to take care of a bunch of "details". I bought mine with a "plug and play" harness that's wired.... random.
Had to use the Test feature to identify each ignition and injector output then re-map for proper firing order.
You should always configure the whole 4-stroke events.
So if you have 6 firing events you need th select 6 ign op