Print Page - subaru avcs issue

Title: subaru avcs issue
Post by: shark_22 on September 28, 2016, 09:42:47 PM

Hi, I got issue with avcs on a h6 ez30r, avcs on intake only. On one side its all god but on the other under 1500rpm the ref position is off by 180degree. Higher then this its ok. Dont know why so if somebody can help me with this it would be very nice.

Thanks

Log and config:

http://vems.hu/vemstune/sharingcenter/reports.php?cmd=view&key=pXqul1

Title: Re: subaru avcs issue
Post by: shark_22 on September 30, 2016, 09:08:27 PM

oil is feeding great to the cam gear and solenoid is ok, any idea?

Title: Re: subaru avcs issue
Post by: Kamuto on October 01, 2016, 01:21:20 AM

Quote from: shark_22 on September 30, 2016, 09:08:27 PM
oil is feeding great to the cam gear and solenoid is ok, any idea?

select different measure tooth, dont be affraid of offset between sides :)

VEMS Community Forum

VEMS => Configuration => Topic started by: shark_22 on September 28, 2016, 09:42:47 PM