Hi Help me please.
I need to adjust the offset.
I have a pulley from the engine m52xx .......
He used to set someone?
http://www.rajce.net/f1070131306 (http://www.rajce.net/f1070131306)
http://www.rajce.net/f1070131334 (http://www.rajce.net/f1070131334)
http://www.rajce.net/f1070131330 (http://www.rajce.net/f1070131330)
http://www.rajce.net/f1070131322 (http://www.rajce.net/f1070131322)
The M52 missing tooth is one cylinder pair late on the trigger ring.
So the firing order is 1-5-3-6-2-4
which means that your "no.1" in the ecu will be cylinder 5 or 2. If you adjust the injector and coils in such a way then setup the trigger settings as normal M50 you will have accurate timing
4th tooth after missing
60degrees
Total = 84 degrees before TDC
How do I set up M52?
TDC after the trigger___?
First trigger tooth___?
It will be functional for the full sequence?
Just swap the first roll with a fifth of the output?
Or to be setup like this?
TDC after the trigger 84
First trigger tooth 0
And just throw a war in order burning?
TDC after the trigger - 60
first trigger tooth 4
is it right?
http://www.rajce.net/f1071516380 (http://www.rajce.net/f1071516380)
http://www.rajce.net/f1071516381 (http://www.rajce.net/f1071516381)
make 35 the top one and try, if not then try making 33 the top one