Text only | Text with Images

VEMS Community Forum

VEMS => Configuration => Topic started by: NOTORIOUS VR on July 15, 2016, 03:36:36 PM

Title: AIM on 2nd serial port now supported
Post by: NOTORIOUS VR on July 15, 2016, 03:36:36 PM
Looks like AIM data stream is now support on the 2nd serial port!

http://www.vems.hu/wiki/index.php?page=BroadcastDatastreamAim

Wonder if that means Port 1 can be used to stream via BT and/or serial connection to laptop simultaneously?
Title: Re: AIM on 2nd serial port now supported
Post by: fphil on July 16, 2016, 09:21:21 AM
I believe yes since on the contrary there will be no use to support this new stream, although I did not test yet.
Title: Re: AIM on 2nd serial port now supported
Post by: gunni on July 16, 2016, 11:48:33 AM
I´d rather personally want to see a CAN stream as an addition vs Aim specific stream
Title: Re: AIM on 2nd serial port now supported
Post by: Kamuto on July 16, 2016, 01:50:56 PM
Quote from: gunni on July 16, 2016, 11:48:33 AM
I´d rather personally want to see a CAN stream as an addition vs Aim specific stream
just wait a little :))
Title: Re: AIM on 2nd serial port now supported
Post by: NOTORIOUS VR on July 16, 2016, 06:59:26 PM
Quote from: gunni on July 16, 2016, 11:48:33 AM
I´d rather personally want to see a CAN stream as an addition vs Aim specific stream

Agree, but at least the 2nd serial isn't wasted on GPS only now.
Title: Re: AIM on 2nd serial port now supported
Post by: Matus on October 03, 2016, 01:03:57 PM
Nice, this is exactly what I need  however, where I can found 2nd RS232 link on board  ?
Text only | Text with Images