Text only | Text with Images

VEMS Community Forum

VEMS => Modifications and Repairs => Topic started by: smurfinator on May 14, 2016, 03:18:48 AM

Title: Can I mod to auditrigger board hardware??
Post by: smurfinator on May 14, 2016, 03:18:48 AM
My 3.8 is set up for 60-2 and cam sync, but have the 60-2 on the front of the motor is causing me problems.  Can I send the board in to outfit for audi trigger in the old flywheel with odd number of teeth?  Who do I talk to about that?

Thanks!
Title: Re: Can I mod to auditrigger board hardware??
Post by: mc2226 on June 19, 2016, 06:23:30 PM
i had primary trigger hall and secondary trigger hall and i converted to auditrigger setup..

you can find everything here: http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FInputTriggerHardWare
and here: http://www.vems.hu/wiki/index.php?page=InputTrigger%2FAudiTrigger

bene
Text only | Text with Images