VEMS Community Forum

VEMS => Calibration & Mapping => Topic started by: Denmark on April 19, 2016, 11:03:45 AM

Title: Mild antilag setup ?
Post by: Denmark on April 19, 2016, 11:03:45 AM
Hi all

Anyone Got som settings for at mild antilag setup
Just to get pops and bangs for fun

On subarus when using launchcontrol it Can/Will drop a valve shim
If the a overshim head (non sti)

Is it possible to make it more valvespring friendly ?
Maybe using antilag on a switch , with iac on 100procent open ?


Thanks
Skassa
Title: Re: Mild antilag setup ?
Post by: NOTORIOUS VR on April 19, 2016, 03:34:29 PM
Pops and bangs are really what you don't want unless you just want the noise.  You can setup anti-lag not to bang/pop very hard, just spool the turbo.  But you will have to play around with the settings to see what works best for your setup.