Text only | Text with Images

VEMS Community Forum

Technical => Triggering => Topic started by: cerozg on December 20, 2015, 10:31:16 AM

Title: Renault RENIX 44-2-2 settings
Post by: cerozg on December 20, 2015, 10:31:16 AM
Hello,

I have old Renault F7P engine with distributor, one coil and RENIX 44-2-2 trigger wheel pattern. Is this setup supported by vemstune and what are trigger settings for it?

Thanks
Title: Re: Renault RENIX 44-2-2 settings
Post by: MWfire on December 20, 2015, 12:23:43 PM
yes, it's supported.
Title: Re: Renault RENIX 44-2-2 settings
Post by: cerozg on December 20, 2015, 12:37:32 PM
Any trigger settings?
Title: Re: Renault RENIX 44-2-2 settings
Post by: cerozg on December 20, 2015, 12:43:00 PM
Angular width of tooth is 360/44=8.18?? Not round number.
Text only | Text with Images