Anyone know how the pinouts go? 1,2,3,4 or 4,3,2,1?
I cant seem to find it online This coilpack is from a v6 mustang I think 2002-2004
Thanks for any help
(http://img490.imageshack.us/img490/2665/coilpackpinoutbz0.jpg)
I was hoping that someone would know.
The only way you might hope to find out is to make a table of the resistances up:
Pin 1 to 2 =
Pin 1 to 3 =
Pin 1 to 4 =
Pin 2 to 3 =
Pin 2 to 4 =
Pin 3 to 4 =
And from that you should be able to work out which pin is the common and then work the coils back from there
Have a look here near the bottom of the page, there is a diagram with the 6 cyl coil pack connector on it.
http://www.bgsoflex.com/mjl/mjl_edis_summary.html (http://www.bgsoflex.com/mjl/mjl_edis_summary.html)
Hilly
Thanks I have seen that picture before.
I am not sure of the pinouts on this exact coilpack is the problem I may as well take a guess it was only $20usd
I'll probably actually just buy a msd setup :-\
Did you try measuring the resistances?
Write them down, put them up here and we'll at least have a stab at the pin outs.
It is the top set of numbers on you picture, ie 1 on the left, 4 on the right
Hilly
Cool Thank you