Hey, I am new to the vems/stand alone engine management world. I have 1992 golf with a turbocharged vr6 and VEMS. I am currently trying to set up the gauge, I have selected 5 separate slots for data display. My question is what is required to have AFR displayed. I have lambda displayed on my first slot along with Manifold pressure and on my second slot I have selected AFR and Manifold pressure, but it just displays 000 for AFR. Also I have selected PSI instead of KPA for pressure reading, will the gauge read negative pressure {inches Mercury}. Can anyone give me some insight towards figuring this out
-Dan
(https://scontent-b-sea.xx.fbcdn.net/hphotos-xpa1/t1.0-9/10157324_10152343022217859_1243076491_n.jpg)
There is something at the bottom of this page :
http://www.vems.hu/manual/vemstune/help2/htmls/main/aim.html
The protocol only contains lambda and MAP pressure in bar :
http://www.vems.hu/wiki/index.php?page=AfreshTiny/AimDisplay
The gauge has to calculate AFR / psi, could be firmware dependant. Running the most recent?
Other than that, I would only ever use lambda for fuel mixture, and psi for MAP pressure, but we all have our motives.