Hi
Just a warning....
My vemstune 1.5.24 (2014-01-08) corrupts my VE and ignition table MAP/TPS settings.
This happens when I edit data in 3D editor. It is bad when you run Alpha-N.
My TPS was 0-1-2-3-5-7......
After 3D edit vemstune changed this to
0-1-1-3-5-7......
in the VE table (not 3D editor)
That confuses vems ECU and the car runs really bad.
The VE/IGN data does not seem to be changed. Only TPS/MAP settings.
I have issued a bug report and hope it will be fixed.
regards
Per
Hello Per,
We have received your report, issue is under investigation.
It is triggered when issuing BURN command from 3D table editor, corruption is contained to Alpha-N TPS axis only (not MAP/RPM axis or tables values)
Workaround to be able to perform useful tuning in the meantime (when using Alpha-N), use 2d table editor during real-time mapping until fix is released.
Best regards, Dave