Print Page - vems 3.1 hall sensor jumper setup

Title: vems 3.1 hall sensor jumper setup
Post by: mads b (dk) on March 18, 2014, 02:27:52 PM

is there anyone who can tell if this is set up for primary hall sensor ?

picture -> www.dropbox.com/s/5lrytxlz9129kc4/2013-05-23%2000.39.58.jpg

Thanks Mads

Title: Re: vems 3.1 hall sensor jumper setup
Post by: mads b (dk) on March 20, 2014, 12:21:05 AM

Problem solved

[v3.1 schematic]

http://www.vems.hu/files/genboardv3/vems_v31_r222_top.pdf

http://www.vems.hu/files/genboardv3/vems_v31_r222_bottom.pdf

And, of course this guide

http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FInputTriggerHardWare

VEMS Community Forum

Technical => Triggering => Topic started by: mads b (dk) on March 18, 2014, 02:27:52 PM