What are the "channels" or data sent by Vems to VT which can be logged in vemslog after declaring them in .ini file.
Per example iy works for "lambda2". What else?
Hello Phil,
All available data channels are already included in vemslog and declared in ini file (per firmware version).
If you mean something else, please elaborate.
Best regards, Dave
Hello Dave,
I have misprinted, I thought .csv not .vemslog, sorry.
So my question is:
What is the list of data channels which can be converted from a .vemslog record to a .csv file.
I understand that these channels have to be declared in the VT .ini file, and I had successfully added the "lambda2" channel to the list. What else? . What are the other names and format?
Regards
Philippe
Hey Phil,
No problem, thanks for clearing it up for me.
The available channel list is very long; But there is a quick way of finding them, the most common ones are list in: "view" -> "editors" -> "add new symbol descriptor"; then in "show symbols" select "with descriptor"; the "Available symbols" list is then populated with the channels which are normally annotated "change gauge data" menu, for a full (long) list select "all".
When in doubt about number format select: " float, "%.2f" ", should work for all.
Best regards, Dave
Quote from: VEMS on March 18, 2014, 03:49:12 PM
... for a full (long) list select "all".
Quite impressive! but I did not find the V3 " iacTarget rpm", only the VT calculated one "calc_iacTargetRPM"
Hello Phil,
When using VT (2014-02-06 version) and firmware 1.2.2X and up, iacTarget rpm real-time is sent from ecu and is included in list.
When using earlier VT or firmware only calculated is available (this does not include afterstart added rpm in calc on has some discrepancies around target decay filter).
Best regards, Dave