Print Page - Trigger problem when cold

Title: Trigger problem when cold
Post by: Denmark on January 03, 2014, 10:52:13 AM

Hi all

I have a Car with a 36-1 primary trigger , that har trigger errors when the weather is cold ,
I have changed the crank trigger but No change ,
If i park the Car in the garage it fires right up and runs great
The trigger error is on when below 5 degrees it so ,
The CAS is 1.9kohm , and thats normal for this Car
Its a older vems ecu around number 700 , so i belive its something with the resistors on the trigger that need to be changed a bit ,
Anyone Got Any suggestions were to start and what resistor to change ?

Thanks
Skassa

Title: Re: Trigger problem when cold
Post by: MWfire on January 05, 2014, 01:08:48 AM

Check shield of primary trigger cable.

Title: Re: Trigger problem when cold
Post by: Denmark on January 20, 2014, 04:39:41 PM

It was indeed the shielding that was broken :)
So its working again

Thanks
Skassa

VEMS Community Forum

Technical => Triggering => Topic started by: Denmark on January 03, 2014, 10:52:13 AM