Print Page - Vems wideband gauge 0-5v lambda output

Title: Vems wideband gauge 0-5v lambda output
Post by: williamson on December 15, 2013, 09:49:11 PM

Hello, I would greatly appreciate of somone can help me here.

I have a vems wideband gauge I purchased a good few years ago but still works well. I recently converted from carbs to microsquirt management which can accept a 0-5v wideband input. Can anyone help me with the wiring to do this, I've looked through the installation guide and just can't quite make sense of how it's done.

Thanks
Zak

Title: Re: Vems wideband gauge 0-5v lambda output
Post by: gunni on December 16, 2013, 09:30:27 AM

This might be some help.

http://www.vems.hu/wiki/index.php?page=AfreshTiny%2FVoltageOutput

In Vemstune - Analog - Analog Output you can find more information when you press F1 in the menu

Title: Re: Vems wideband gauge 0-5v lambda output
Post by: williamson on December 17, 2013, 04:24:17 PM

Great thanks il have a read and have a go

VEMS Community Forum

Technical => Wideband & EGT Gauge => Topic started by: williamson on December 15, 2013, 09:49:11 PM