Text only | Text with Images

VEMS Community Forum

VEMS => Software => Topic started by: peter_jensen on September 15, 2013, 09:08:13 PM

Title: map correction table
Post by: peter_jensen on September 15, 2013, 09:08:13 PM
How to turn on the map correction table and is it + or x the Ve table.

TNX
Title: Re: map correction table
Post by: gunni on September 15, 2013, 10:49:56 PM
it is * the VE table, you will need to be running Alpha-N.
Title: Re: map correction table
Post by: peter_jensen on September 15, 2013, 11:49:31 PM
Did some test and also enabled alpha-n but the correction table is not active no matter what I due.
I have a set op in my test lab and there it worked well using a old ecu. I cant find where to enable this correction table. ???

Peter   
Title: Re: map correction table
Post by: Erikk on September 16, 2013, 11:43:28 AM
I guess your testbench only gives you atmospheric pressure to the MAP sensor
Not sure, but you may need to jump into Base Setup -> Alpha-n/Speed Density settings ... and choose "Before throttle" on th 'Map Sensor Connection' setting.

I´ve never cared about it under atmospheric pressure.
Text only | Text with Images