Print Page - Play Trigger 30-2 wheel

Title: Play Trigger 30-2 wheel
Post by: KWest on September 12, 2013, 09:51:21 PM

Hey everyone,
My Aprilia V-twin uses a 30-2 trigger wheel and I'll looking to bench test the VEMS along side the stock ECU by supplying them the same inputs and comparing the outputs with my scope/logic analyzer. Is it possible to have play trigger emulate a 30-2 wheel?

Thanks in advance.

Title: Re: Play Trigger 30-2 wheel
Post by: GintsK on September 13, 2013, 03:20:55 AM

Vemstune offer to save triggerlog to sound file. Afterwards you can edit it and play in loop.
But I also used Goldwave programm to create such files from zero. Probably Audacity is sutable too (free).

Title: Re: Play Trigger 30-2 wheel
Post by: KWest on September 13, 2013, 06:40:17 AM

Thanks for the reply.
I have used CrankWheelPulser by B&G before to generate .wav files that play in a loop, however the option to do fixed rate sweeps and then hold an RPM in vemstune is exactly what I'm looking for. Also the the second channel output set to 0deg will let me trigger my scope and logic probe perfectly to compare ECU outputs.

VEMS Community Forum

VEMS => Software => Topic started by: KWest on September 12, 2013, 09:51:21 PM