Hi all
I would like to know how you guys setup aircon request
On subaru's when the aircon is turned there is a 12volt + going the the ecu ,
The ecu is then used to turn om the clutch om the compressor,
Right now I''m using transistors , and lots of other parts together with a misc output to turn it on as i need to be able to turn if the clutch at wot and High rpm
Any suggestion to run it in a easyer Way?
Thanks
Skassa
http://www.vemssupport.com/forum/index.php/topic,2129.0.html
Great Car and Nice setup
I dont have the problem with the load, but the problem with running the ac clutch
It the oe ecu that turns the ac compressorclutch on/off,
In the Car there is a ac bottum, and it sende a 12v + to the ecu , the ecu then turns on the ac clutch , if the speederpedal is not pressed more then 60% and running off boost,
So i have had some addon made to run the together with a misc output ,
But it would be really Nice to be able to use a simple input on the ecu , and te select if the input signal is High or low, not just low like now ,
Then the ac system could run all cars like oe setup, this is just not possible now :(