Hello ..... it is possible instead of calculating to log req-fuel .... Im thinking a quick rough fuel map .... plenty lambda corr and then look at the log what the largest nozzle time with wideopen throttle and lambda 1?
why will you probably ask .... because the nozzle size can not be looked up on the net :)
Regards Mads
Yes. you can create VE table with 80...110 values (depending on engine) at WOT, guess initial required fuel and watch what happens at WOT.
BTW what engine is it?
Gints
Vw type 1 engine 1600cc with 40mm ITB and 4-1 exhaust.... otherwise nearly standard
Regards Mads